3.10.6. BuildSteps

There are a few parent classes that are used as base classes for real buildsteps. This section describes the base classes. The “leaf” classes are described in Build Steps.

See Writing New BuildSteps for a guide to implementing new steps.

3.10.6.1. BuildStep

class buildbot.process.buildstep.BuildStep(name, description, descriptionDone, descriptionSuffix, locks, haltOnFailure, flunkOnWarnings, flunkOnFailure, warnOnWarnings, warnOnFailure, alwaysRun, progressMetrics, useProgress, doStepIf, hideStepIf)

All constructor arguments must be given as keyword arguments. Each constructor parameter is copied to the corresponding attribute.

name: The name of the step. Note that this value may change when the step is started, if the existing name was not unique.

stepid: The ID of this step in the database. This attribute is not set until the step starts.

description: The description of the step.

descriptionDone: The description of the step after it has finished.

descriptionSuffix: Any extra information to append to the description.

locks: List of locks for this step; see Interlocks.

progressMetrics: List of names of metrics that should be used to track the progress of this build and build ETA’s for users.

useProgress: If true (the default), then ETAs will be calculated for this step using progress metrics. If the step is known to have unpredictable timing (e.g., an incremental build), then this should be set to false.

doStepIf: A callable or bool to determine whether this step should be executed. See Parameters Common to all Steps for details.

hideStepIf: A callable or bool to determine whether this step should be shown in the waterfall and build details pages. See Parameters Common to all Steps for details.

The following attributes affect the behavior of the containing build:

haltOnFailure: If true, the build will halt on a failure of this step, and not execute subsequent steps (except those with alwaysRun).

flunkOnWarnings: If true, the build will be marked as a failure if this step ends with warnings.

flunkOnFailure: If true, the build will be marked as a failure if this step fails.

warnOnWarnings: If true, the build will be marked as warnings, or worse, if this step ends with warnings.

warnOnFailure: If true, the build will be marked as warnings, or worse, if this step fails.

alwaysRun: If true, the step will run even if a previous step halts the build with haltOnFailure.

logEncoding: The log encoding to use for logs produced in this step, or None to use the global default. See Log Handling.

rendered: At the beginning of the step, the renderable attributes are rendered against the properties. There is a slight delay however when those are not yet rendered, which leads to weird and difficult to reproduce bugs. To address this problem, a rendered attribute is available for methods that could be called early in the buildstep creation.

results: This is the result (a code from buildbot.process.results) of the step. This attribute only exists after the step is finished, and should only be used in getResultSummary.

A few important pieces of information are not available when a step is constructed and are added later. These are set by the following methods; the order in which these methods are called is not defined.

setBuild(build)

Parameters:: build – the Build instance controlling this step.

This method is called during setup to set the build instance controlling this worker. Subclasses can override this to get access to the build object as soon as it is available. The default implementation sets the build attribute.

build: The build object controlling this step.

setWorker(worker)

Parameters:: worker – the Worker instance on which this step will run.

Similarly, this method is called with the worker that will run this step. The default implementation sets the worker attribute.

worker: The worker that will run this step.

workdir

Directory where actions of the step will take place. The workdir is set by order of priority:

workdir of the step, if defined via constructor argument
workdir of the BuildFactory (itself defaults to ‘build’)

BuildFactory workdir can also be a function of a sourcestamp (see Factory Workdir Functions).

setDefaultWorkdir(workdir)

Parameters:: workdir – the default workdir, from the build

Note

This method is deprecated and should not be used anymore, as workdir is calculated automatically via a property.

setupProgress(): This method is called during build setup to give the step a chance to set up progress tracking. It is only called if the build has useProgress set. There is rarely any reason to override this method.

Execution of the step itself is governed by the following methods and attributes.

run()

Returns:: result via Deferred

Execute the step. When this method returns (or when the Deferred it returns fires), the step is complete. The method’s return value must be an integer, giving the result of the step – a constant from buildbot.process.results. If the method raises an exception or its Deferred fires with failure, then the step will be completed with an EXCEPTION result. Any other output from the step (logfiles, status strings, URLs, etc.) is the responsibility of the run method.

The function is not called if the step is skipped or otherwise not run.

Subclasses should override this method.

interrupt(reason)

Parameters:: reason (string or Failure) – why the build was interrupted

This method is used from various control interfaces to stop a running step. The step should be brought to a halt as quickly as possible, by cancelling a remote command, killing a local process, etc.

The reason parameter can be a string or, when a worker is lost during step processing, a ConnectionLost failure.

The parent method handles any pending lock operations, and should be called by implementations in subclasses.

stopped: If false, then the step is running. If true, the step is not running, or has been interrupted.

A step can indicate its up-to-the-moment status using a short summary string. These methods allow step subclasses to produce such summaries.

updateSummary(): Update the summary, calling getCurrentSummary or getResultSummary as appropriate. New-style build steps should call this method any time the summary may have changed. This method is debounced, so even calling it for every log line is acceptable.

getCurrentSummary()

Returns:: dictionary, optionally via Deferred

Returns a dictionary containing status information for a running step. The dictionary can have a step key with a unicode value giving a summary for display with the step. This method is only called while the step is running.

New-style build steps should override this method to provide a more interesting summary than the default u"running".

getResultSummary()

Returns:: dictionary, optionally via Deferred

Returns a dictionary containing status information for a completed step. The dictionary can have keys step and build, each with unicode values. The step key gives a summary for display with the step, while the build key gives a summary for display with the entire build. The latter should be used sparingly, and include only information that the user would find relevant for the entire build, such as a number of test failures. Either or both keys can be omitted.

This method is only called when the step is finished. The step’s result is available in self.results at that time.

New-style build steps should override this method to provide a more interesting summary than the default, or to provide any build summary information.

getBuildResultSummary()

Returns:: dictionary, optionally via Deferred

Returns a dictionary containing status information for a completed step. This method calls getResultSummary, and automatically computes a build key from the step key according to the updateBuildSummaryPolicy.

describe(done=False)

Parameters:: done – If true, the step is finished.
Returns:: list of strings

Describe the step succinctly. The return value should be a sequence of short strings suitable for display in a horizontally constrained space.

Note

Be careful not to assume that the step has been started in this method. In relatively rare circumstances, steps are described before they have started. Ideally, unit tests should be used to ensure that this method is resilient.

Note

This method is not called for new-style steps. Instead, override getCurrentSummary and getResultSummary.

addTestResultSets(): The steps may override this to add any test result sets for this step via self.addTestResultSet(). This function is called just before the step execution is started. The function is not called if the step is skipped or otherwise not run.

addTestResultSet(description, category, value_unit)

Parameters:

description – Description of the test result set
category – Category of the test result set
value_unit – The value unit of the test result set

Returns:

The ID of the created test result set via a Deferred.

Creates a new test result set to which test results can be associated.

There are standard values of the category and value_unit parameters, see TODO.

addTestResult(setid, value, test_name=None, test_code_path=None, line=None, duration_ns=None)

Parameters:

setid – The ID of a test result set returned by addTestResultSet
value – The value of the result as a string
test_name – The name of the test
test_code_path – The path to the code file that resulted in this test result
line – The line within test_code_path file that resulted in this test result
duration_ns – The duration of the test itself, in nanoseconds

Creates a test result. Either test_name or test_code_path must be specified. The function queues the test results and will submit them to the database when enough test results are added so that performance impact is minimized.

finishTestResultSets(): The steps may override this to finish submission of any test results for the step.

Build steps have statistics, a simple key-value store of data which can later be aggregated over all steps in a build. Note that statistics are not preserved after a build is complete.

setBuildData(self, name, value, source)

Parameters:

name (unicode) – the name of the data
value (bytestr) – the value of the data as bytes
source (unicode) – the source of the data

Returns:

Deferred

Builds can have transient data attached to them which allows steps to communicate to reporters and among themselves. The data is a byte string and its interpretation depends on the particular step or reporter.

hasStatistic(stat)

Parameters:: stat (string) – name of the statistic
Returns:: True if the statistic exists on this step

getStatistic(stat, default=None)

Parameters:

stat (string) – name of the statistic
default – default value if the statistic does not exist

Returns:

value of the statistic, or the default value

getStatistics()

Returns:: a dictionary of all statistics for this step

setStatistic(stat, value)

Parameters:

stat (string) – name of the statistic
value – value to assign to the statistic

Returns:

value of the statistic

Build steps support progress metrics - values that increase roughly linearly during the execution of the step, and can thus be used to calculate an expected completion time for a running step. A metric may be a count of lines logged, tests executed, or files compiled. The build mechanics will take care of translating this progress information into an ETA for the user.

setProgress(metric, value)

Parameters:

metric (string) – the metric to update
value (integer) – the new value for the metric

Update a progress metric. This should be called by subclasses that can provide useful progress-tracking information.

The specified metric name must be included in progressMetrics.

The following methods are provided as utilities to subclasses. These methods should only be invoked after the step has started.

workerVersion(command, oldversion=None)

Parameters:

command (string) – command to examine
oldversion – return value if the worker does not specify a version

Returns:

string

Fetch the version of the named command, as specified on the worker. In practice, all commands on a worker have the same version, but passing command is still useful to ensure that the command is implemented on the worker. If the command is not implemented on the worker, workerVersion will return None.

Versions take the form x.y where x and y are integers, and are compared as expected for version numbers.

Buildbot versions older than 0.5.0 did not support version queries; in this case, workerVersion will return oldVersion. Since such ancient versions of Buildbot are no longer in use, this functionality is largely vestigial.

workerVersionIsOlderThan(command, minversion)

Parameters:

command (string) – command to examine
minversion – minimum version

Returns:

boolean

This method returns true if command is not implemented on the worker, or if it is older than minversion.

checkWorkerHasCommand(command)

Parameters:: command (string) – command to examine

This method raise WorkerSetupError if command is not implemented on the worker

getWorkerName()

Returns:: string

Get the name of the worker assigned to this step.

Most steps exist to run commands. While the details of exactly how those commands are constructed are left to subclasses, the execution of those commands comes down to this method:

runCommand(command)

Parameters:: command – RemoteCommand instance
Returns:: Deferred

This method connects the given command to the step’s worker and runs it, returning the Deferred from run.

The BuildStep class provides methods to add log data to the step. Subclasses provide a great deal of user-configurable functionality on top of these methods. These methods can be called while the step is running, but not before.

addLog(name, type='s', logEncoding=None)

Parameters:

name – log name
type – log type; see logchunk
logEncoding – the log encoding, or None to use the step or global default (see Log Handling)

Returns:

Log instance via Deferred

Add a new logfile with the given name to the step, and return the log file instance.

getLog(name)

Parameters:

name – log name

Raises:

KeyError – if there is no such log
KeyError – if no such log is defined

Returns:

Log instance

Return an existing logfile, previously added with addLog. Note that this return value is synchronous, and only available after addLog’s deferred has fired.

addCompleteLog(name, text)

Parameters:

name – log name
text – content of the logfile

Returns:

Deferred

This method adds a new log and sets text as its content. This is often useful to add a short logfile describing activities performed on the master. The logfile is immediately closed, and no further data can be added.

If the logfile’s content is a bytestring, it is decoded with the step’s log encoding or the global default log encoding. To add a logfile with a different character encoding, perform the decode operation directly and pass the resulting unicode string to this method.

addHTMLLog(name, html)

Parameters:

name – log name
html – content of the logfile

Returns:

Deferred

Similar to addCompleteLog, this adds a logfile containing pre-formatted HTML, allowing more expressiveness than the text format supported by addCompleteLog.

addLogObserver(logname, observer)

Parameters:

logname – log name
observer – log observer instance

Add a log observer for the named log. The named log need not have been added already. The observer will be connected when the log is added.

See Adding LogObservers for more information on log observers.

addLogWithFailure(why, logprefix='')

Parameters:

why (Failure) – the failure to log
logprefix – prefix for the log name

Returns:

Deferred

Add log files displaying the given failure, named <logprefix>err.text and <logprefix>err.html.

addLogWithException(why, logprefix='')

Parameters:

why (Exception) – the exception to log
logprefix – prefix for the log name

Returns:

Deferred

Similar to addLogWithFailure, but for an Exception instead of a Failure.

Along with logs, build steps have an associated set of links that can be used to provide additional information for developers. Those links are added during the build with this method:

addURL(name, url)

Parameters:

name – URL name
url – the URL

Add a link to the given url, with the given name to displays of this step. This allows a step to provide links to data that is not available in the log files.

3.10.6.2. CommandMixin

The runCommand method can run a RemoteCommand instance, but it’s no help in building that object or interpreting the results afterward. This mixin class adds some useful methods for running commands.

This class can only be used in new-style steps.

class buildbot.process.buildstep.CommandMixin

Some remote commands are simple enough that they can boil down to a method call. Most of these take an abandonOnFailure argument which, if true, will abandon the entire buildstep on command failure. This is accomplished by raising BuildStepFailed.

These methods all write to the stdio log (generally just for errors). They do not close the log when finished.

runRmdir(dir, abandonOnFailure=True)

Parameters:

dir – directory to remove
abndonOnFailure – if true, abandon step on failure

Returns:

Boolean via Deferred

Remove the given directory, using the rmdir command. Returns False on failure.

runMkdir(dir, abandonOnFailure=True)

Parameters:

dir – directory to create
abndonOnFailure – if true, abandon step on failure

Returns:

Boolean via Deferred

Create the given directory and any parent directories, using the mkdir command. Returns False on failure.

pathExists(path)

Parameters:: path – path to test
Returns:: Boolean via Deferred

Determine if the given path exists on the worker (in any form - file, directory, or otherwise). This uses the stat command.

runGlob(path)

Parameters:: path – path to test
Returns:: list of filenames

Get the list of files matching the given path pattern on the worker. This uses Python’s glob module. If the runGlob method fails, it aborts the step.

getFileContentFromWorker(path, abandonOnFailure=False)

Parameters:: path – path of the file to download from worker
Returns:: string via deferred (content of the file)

Get the content of a file on the worker.

3.10.6.3. ShellMixin

Most Buildbot steps run shell commands on the worker, and Buildbot has an impressive array of configuration parameters to control that execution. The ShellMixin mixin provides the tools to make running shell commands easy and flexible.

This class can only be used in new-style steps.

class buildbot.process.buildstep.ShellMixin

This mixin manages the following step configuration parameters, the contents of which are documented in the manual. Naturally, all of these are renderable.

command

workdir

env

want_stdout

want_stderr

usePTY

logfiles

lazylogfiles

timeout

maxTime

logEnviron

interruptSignal

sigtermTime

initialStdin

decodeRC

setupShellMixin(constructorArgs, prohibitArgs=[])

Parameters:

constructorArgs (dict) – constructor keyword arguments
prohibitArgs (list) – list of recognized arguments to reject

Returns:

keyword arguments destined for BuildStep

This method is intended to be called from the shell constructor, and be passed any keyword arguments not otherwise used by the step. Any attributes set on the instance already (e.g., class-level attributes) are used as defaults. Attributes named in prohibitArgs are rejected with a configuration error.

The return value should be passed to the BuildStep constructor.

makeRemoteShellCommand(collectStdout=False, collectStderr=False, **overrides)

Parameters:

collectStdout – if true, the command’s stdout will be available in cmd.stdout on completion
collectStderr – if true, the command’s stderr will be available in cmd.stderr on completion
overrides – overrides arguments that might have been passed to setupShellMixin

Returns:

RemoteShellCommand instance via Deferred

This method constructs a RemoteShellCommand instance based on the instance attributes and any supplied overrides. It must be called while the step is running, as it examines the worker capabilities before creating the command. It takes care of just about everything:

Creating log files and associating them with the command

Merging environment configuration

Selecting the appropriate workdir configuration

All that remains is to run the command with runCommand.

The ShellMixin class implements getResultSummary, returning a summary of the command. If no command was specified or run, it falls back to the default getResultSummary based on descriptionDone. Subclasses can override this method to return a more appropriate status.

3.10.6.4. Exceptions

exception buildbot.process.buildstep.BuildStepFailed: This exception indicates that the buildstep has failed. It is useful as a way to skip all subsequent processing when a step goes wrong.