2.4.12. Web Server¶

Note

As of Buildbot 0.9.0, the built-in web server replaces the old WebStatus plugin.

Buildbot contains a built-in web server. This server is configured with the www configuration key, which specifies a dictionary with the following keys:

port

The TCP port on which to serve requests. Note that SSL is not supported. To host Buildbot with SSL, use an HTTP proxy such as lighttpd, nginx, or Apache. If this is None, the default, then the master will not implement a web server.

json_cache_seconds

The number of seconds into the future at which an HTTP API response should expire.

rest_minimum_version

The minimum supported REST API version. Any versions less than this value will not be available. This can be used to ensure that no clients are depending on API versions that will soon be removed from Buildbot.

plugins

This key gives a dictionary of additional UI plugins to load, along with configuration for those plugins. These plugins must be separately installed in the Python environment, e.g., pip install buildbot-waterfall-view. For example:

c['www'] = {
    'plugins': {'waterfall_view': {'num_builds': 50}}
}

debug

If true, then debugging information will be output to the browser. This is best set to false (the default) on production systems, to avoid the possibility of information leakage.

allowed_origins

This gives a list of origins which are allowed to access the Buildbot API (including control via JSONRPC 2.0). It implements cross-origin request sharing (CORS), allowing pages at origins other than the Buildbot UI to use the API. Each origin is interpreted as filename match expression, with ? matching one character and * matching anything. Thus ['*'] will match all origins, and ['https://*.buildbot.net'] will match secure sites under buildbot.net. The Buildbot UI will operate correctly without this parameter; it is only useful for allowing access from other web applications.

auth

Authentication module to use for the web server. See Authentication plugins.

avatar_methods

List of methods that can be used to get avatar pictures to use for the web server. By default, buildbot uses Gravatar to get images associated with each users, if you want to disable this you can just specify empty list:

c['www'] = {
    'avatar_methods': []
}

For use of corporate pictures, you can use LdapUserInfo, which can also acts as an avatar provider. See Authentication plugins.

logfileName

Filename used for http access logs, relative to the master directory. If set to None or the empty string, the content of the logs will land in the main twisted.log log file. (Default to http.log)

logRotateLength

The amount of bytes after which the http.log file will be rotated. (Default to the same value as for the twisted.log file, set in buildbot.tac)

maxRotatedFiles

The amount of log files that will be kept when rotating (Default to the same value as for the twisted.log file, set in buildbot.tac)

versions

Custom component versions that you'd like to display on the About page. Buildbot will automatically prepend the versions of Python, twisted and buildbot itself to the list.

versions should be a list of tuples. for example:

c['www'] = {
    # ...
    'versions': [
        ('master.cfg', '0.1'),
        ('OS', 'Ubuntu 14.04'),
    ]
}

The first element of a tuple stands for the name of the component, the second stands for the corresponding version.

custom_templates_dir

This directory will be parsed for custom angularJS templates to replace the one of the original website templates. if the directory string is relative, it will be joined to the master's basedir. Either *.jade files or *.html files can be used, and will be used to override views/<filename>.html templates in the angularjs templateCache. Unlike with the regular nodejs based angularjs build system, Python only jade interpreter is used to parse the jade templates. pip install pyjade is be required to use jade templates. You can also override plugin's directives, but they have to be in another directory.

# replace the template whose source is in:
# www/base/src/app/builders/build/build.tpl.jade
build.jade

# replace the template whose source is in
# www/console_view/src/module/view/builders-header/buildersheader.tpl.jade
console_view/buildersheader.html

Known differences between nodejs jade and pyjade:

quotes in attributes are not quoted. https://github.com/syrusakbary/pyjade/issues/132 This means you should use double quotes for attributes e.g: tr(ng-repeat="br in buildrequests | orderBy:'-submitted_at'")

change_hook_dialects

See Change Hooks.

Note

The buildbotURL configuration value gives the base URL that all masters will use to generate links. The www configuration gives the settings for the webserver. In simple cases, the buildbotURL contains the hostname and port of the master, e.g., http://master.example.com:8010/. In more complex cases, with multiple masters, web proxies, or load balancers, the correspondance may be less obvious.

2.4.12.1. Authentication plugins¶

By default, Buildbot does not require people to authenticate in order to see the readonly data. In order to access control features in the web UI, you will need to configure an authentication plugin.

Authentication plugins are implemented as classes, and passed as the auth parameter to www.

The available classes are described here:

class buildbot.www.auth.NoAuth¶: This class is the default authentication plugin, which disables authentication

class buildbot.www.auth.UserPasswordAuth(users)¶

Parameters:	users -- list of `("user","password")` tuples, or a dictionary of `{"user": "password", ..}`

Simple username/password authentication using a list of user/password tuples provided in the configuration file.

from buildbot.plugins import util
c['www'] = {
    # ...
    'auth': util.UserPasswordAuth({"homer": "doh!"}),
}

class buildbot.www.auth.HTPasswdAuth(passwdFile)¶

Parameters:	passwdFile -- An `.htpasswd` file to read

This class implements simple username/password authentication against a standard .htpasswd file.

from buildbot.plugins import util
c['www'] = {
    # ...
    'auth': util.HTPasswdAuth("my_htpasswd"),
}

class buildbot.www.oauth2.GoogleAuth(clientId, clientSecret)¶

Parameters:	clientId -- The client ID of your buildbot application clientSecret -- The client secret of your buildbot application

This class implements an authentication with Google single sign-on. You can look at the Google oauth2 documentation on how to register your Buildbot instance to the Google systems. The developer console will give you the two parameters you have to give to GoogleAuth

Register your Buildbot instance with the BUILDBOT_URL/auth/login url as the allowed redirect URI.

Example:

from buildbot.plugins import util
c['www'] = {
    # ...
    'auth': util.GoogleAuth("clientid", "clientsecret"),
}

in order to use this module, you need to install the Python requests module

pip install requests

class buildbot.www.oauth2.GitHubAuth(clientId, clientSecret)¶

Parameters:	clientId -- The client ID of your buildbot application clientSecret -- The client secret of your buildbot application

This class implements an authentication with GitHub single sign-on. It functions almost identically to the GoogleAuth class.

Register your Buildbot instance with the BUILDBOT_URL/auth/login url as the allowed redirect URI.

Example:

from buildbot.plugins import util
c['www'] = {
    # ...
    'auth': util.GitHubAuth("clientid", "clientsecret"),
}

class buildbot.www.oauth2.GitLabAuth(instanceUri, clientId, clientSecret)¶

Parameters:	instanceUri -- The URI of your GitLab instance clientId -- The client ID of your buildbot application clientSecret -- The client secret of your buildbot application

This class implements an authentication with GitLab single sign-on. It functions almost identically to the GoogleAuth class.

Register your Buildbot instance with the BUILDBOT_URL/auth/login url as the allowed redirect URI.

Example:

from buildbot.plugins import util
c['www'] = {
    # ...
    'auth': util.GitLabAuth("https://gitlab.com", "clientid", clientsecret"),
}

class buildbot.www.auth.RemoteUserAuth¶

Parameters:	header -- header to use to get the username (defaults to `REMOTE_USER`) headerRegex -- regular expression to get the username from header value (defaults to `"(?P<username>[^ @]+)@(?P<realm>[^ @]+)")`. Note that your at least need to specify a `?P<username>` regular expression named group. userInfoProvider -- user info provider; see User Information

If the Buildbot UI is served through a reverse proxy that supports HTTP-based authentication (like apache or lighttpd), it's possible to to tell Buildbot to trust the web server and get the username from th request headers.

Administrator must make sure that it's impossible to get access to Buildbot using other way than through frontend. Usually this means that Buildbot should listen for incoming connections only on localhost (or on some firewall-protected port). The reverse proxy must require HTTP authentication to access Buildbot pages (using any source for credentials, such as htpasswd, PAM, LDAP, Kerberos).

Example:

from buildbot.plugins import util
c['www'] = {
    # ...
    'auth': util.RemoteUserAuth(),
}

A corresponding Apache configuration example

<Location "/">
        AuthType Kerberos
        AuthName "Buildbot login via Kerberos"
        KrbMethodNegotiate On
        KrbMethodK5Passwd On
        KrbAuthRealms <<YOUR CORP REALMS>>
        KrbVerifyKDC off
        KrbServiceName Any
        Krb5KeyTab /etc/krb5/krb5.keytab
        KrbSaveCredentials Off
        require valid-user
        Order allow,deny

        Satisfy Any

        #] SSO
        RewriteEngine On
        RewriteCond %{LA-U:REMOTE_USER} (.+)$
        RewriteRule . - [E=RU:%1,NS]
        RequestHeader set REMOTE_USER %{RU}e

</Location>

The advantage of this sort of authentication is that it is uses a proven and fast implementation for authentication. The problem is that the only information that is passed to Buildbot is the username, and there is no way to pass any other information like user email, user groups, etc. That information can be very useful to the mailstatus plugin, or for authorization processes. See User Information for a mechanism to supply that information.

2.4.12.2. User Information¶

For authentication mechanisms which cannot provide complete information about a user, Buildbot needs another way to get user data. This is useful both for authentication (to fetch more data about the logged-in user) and for avatars (to fetch data about other users).

This extra information is provided by, appropriately enough, user info providers. These can be passed to RemoteUserAuth and as an element of avatar_methods.

This can also be passed to oauth2 authentication plugins. In this case the username provided by oauth2 will be used, and all other informations will be taken from ldap (Full Name, email, and groups):

Currently only one provider is available:

class buildbot.ldapuserinfo.LdapUserInfo(uri, bindUser, bindPw, accountBase, accountPattern, groupBase=None, groupMemberPattern=None, groupName=None, accountFullName, accountEmail, avatarPattern=None, avatarData=None, accountExtraFields=None)¶

param uri: uri of the ldap server

param bindUser: username of the ldap account that is used to get the infos for other users (usually a "faceless" account)

param bindPw: password of the bindUser

param accountBase:

the base dn (distinguished name)of the user database

param accountPattern:

the pattern for searching in the account database. This must contain the %(username)s string, which is replaced by the searched username

param accountFullName:

the name of the field in account ldap database where the full user name is to be found.

param accountEmail:

the name of the field in account ldap database where the user email is to be found.

param groupBase:

the base dn of the groups database.

param groupMemberPattern:

the pattern for searching in the group database. This must contain the %(dn)s string, which is replaced by the searched username's dn

param groupName:

the name of the field in groups ldap database where the group name is to be found.

param avatarPattern:

the pattern for searching avatars from emails in the account database. This must contain the %(email)s string, which is replaced by the searched email

param avatarData:

the name of the field in groups ldap database where the avatar picture is to be found. This field is supposed to contain the raw picture, format is automatically detected from jpeg, png or git.

param accountExtraFields:

extra fields to extracts for use with the authorization policies.

If one of the three optional groups parameters is supplied, then all of them become mandatory. If none is supplied, the retrieved user info has an empty list of groups.

Example:

    from buildbot.plugins import util

    # this configuration works for MS Active Directory ldap implementation
    # we use it for user info, and avatars
    userInfoProvider = util.LdapUserInfo(
        uri='ldap://ldap.mycompany.com:3268',
        bindUser='ldap_user',
        bindPw='p4$$wd',
        accountBase='dc=corp,dc=mycompany,dc=com',
        groupBase='dc=corp,dc=mycompany,dc=com',
        accountPattern='(&(objectClass=person)(sAMAccountName=%(username)s))',
        accountFullName='displayName',
        accountEmail='mail',
        groupMemberPattern='(&(objectClass=group)(member=%(dn)s))',
        groupName='cn',
        avatarPattern='(&(objectClass=person)(mail=%(email)s))',
        avatarData='thumbnailPhoto',
    )
    c['www'] = dict(port=PORT, allowed_origins=["*"],
                    url=c['buildbotURL'],
                    auth=util.RemoteUserAuth(userInfoProvider=userInfoProvider),
                    avatar_methods=[userInfoProvider,
                                    util.AvatarGravatar()])

.. note::

    In order to use this module, you need to install the ``python3-ldap`` module:

    .. code-block:: bash

        pip install python3-ldap

In the case of oauth2 authentications, you have to pass the userInfoProvider as keyword argument::

        from buildbot.plugins import util
        userInfoProvider = util.LdapUserInfo(...)
        c['www'] = {
            # ...
            'auth': util.GoogleAuth("clientid", "clientsecret", userInfoProvider=userInfoProvider),
        }

2.4.12.3. Reverse Proxy Configuration¶

It is usually better to put buildbot behind a reverse proxy in production.

Provides automatic gzip compression
Provides SSL support with a widely used implementation
Provides support for http/2 or spdy for fast parallel REST api access from the browser

Reverse proxy however might be problematic for websocket, you have to configure it specifically to pass web socket requests. Here is an nginx configuration that is known to work (nginx 1.6.2):

server {
        # Enable SSL and SPDY
        listen 443 ssl spdy default_server;

        server_name yourdomain.com;

        root html;
        index index.html index.htm;

        ssl on;
        ssl_certificate /etc/nginx/ssl/server.cer;
        ssl_certificate_key /etc/nginx/ssl/server.key;

        # put a one day session timeout for websockets to stay longer
        ssl_session_cache      shared:SSL:1440m;
        ssl_session_timeout  1440m;
        add_header        Alternate-Protocol  443:npn-spdy/3;

        # please consult latest nginx documentation for current secure encryption settings
        ssl_protocols ..
        ssl_ciphers ..
        ssl_prefer_server_ciphers   on;
        #

        # force https
        add_header Strict-Transport-Security "max-age=31536000; includeSubdomains;";
        spdy_headers_comp 5;

        # you could use / if you use domain based proxy instead of path based proxy
        location /buildbot/ {
            proxy_pass http://localhost:5000/;
        }
        location /buildbot/sse/ {
            # proxy buffering will prevent sse to work
            proxy_buffering off;
            proxy_pass http://localhost:5000/sse/;
        }
        # required for websocket
        location /buildbot/ws {
              proxy_http_version 1.1;
              proxy_set_header Upgrade $http_upgrade;
              proxy_set_header Connection "upgrade";
              proxy_pass http://localhost:5000/ws;
              # raise the proxy timeout for the websocket
              proxy_read_timeout 6000s;
        }
}

To run with Apache2, you'll need mod_proxy_wstunnel in addition to mod_proxy_http. Serving HTTPS (mod_ssl) is advised to prevent issues with enterprise proxies (see Server Sent Events), even if you don't need the encryption itself.

Here is a configuration that is known to work (Apache 2.4.10 / Debian 8), directly at the top of the domain.

<VirtualHost *:443>
    ServerName buildbot.example
    ServerAdmin webmaster@buildbot.example

    <Location /ws>
      ProxyPass ws://localhost:8020/ws
      ProxyPassReverse ws://localhost:8020/ws
    </Location>

    ProxyPass /ws !
    ProxyPass / http://localhost:8020/
    ProxyPassReverse / http://localhost:8020/

    SetEnvIf X-Url-Scheme https HTTPS=1
    ProxyPreserveHost On

    SSLEngine on
    SSLCertificateFile /path/to/cert.pem
    SSLCertificateKeyFile /path/to/cert.key

    # check Apache2 documentation for current safe SSL settings
    # This is actually the Debian 8 default at the time of this writing:
    SSLProtocol all -SSLv3

</VirtualHost>

2.4.12.4. Authorization rules¶

Endpoint matchers¶

Endpoint matchers are responsible for creating rules to match REST endpoints, and requiring roles for them. The following sequence is implemented by each EndpointMatcher class

Check whether the requested endpoint is supported by this matcher
Get necessary info from data api, and decides whether it matches.
Looks if the users has the required role.

Several endpoints matchers are currently implemented

class buildbot.www.authz.endpointmatchers.AnyEndpointMatcher(role)¶

Parameters:	role -- The role which grants access to any endpoint.

AnyEndpointMatcher grants all rights to a people with given role (usually "admins")

class buildbot.www.authz.endpointmatchers.ForceBuildEndpointMatcher(builder, role)¶

Parameters:	builder -- name of the builder. role -- The role needed to get access to such endpoints.

ForceBuildEndpointMatcher grants all rights to a people with given role (usually "admins")

class buildbot.www.authz.endpointmatchers.StopBuildEndpointMatcher(builder, role)¶

Parameters:	builder -- name of the builder. role -- The role needed to get access to such endpoints.

StopBuildEndpointMatcher grants all rights to a people with given role (usually "admins")

class buildbot.www.authz.endpointmatchers.RebuildBuildEndpointMatcher(builder, role)¶

Parameters:	builder -- name of the builder. role -- The role needed to get access to such endpoints.

RebuildBuildEndpointMatcher grants all rights to a people with given role (usually "admins")

Role matchers¶

Endpoint matchers are responsible for creating rules to match people and grant them roles. You can grant roles from groups information provided by the Auth plugins, or if you prefer directly to people's email.

class buildbot.www.authz.roles.RolesFromGroups(groupPrefix)¶

Parameters:	groupPrefix -- prefix to remove from each group

RolesFromGroups grants roles from the groups of the user. If a user has group buildbot-admin, and groupPrefix is buildbot-, then user will be granted the role 'admin'

ex:

roleMatchers=[
  util.RolesFromGroups(groupPrefix="buildbot-")
]

class buildbot.www.authz.roles.RolesFromEmails(roledict)¶

Parameters:	roledict -- dictionary with key=role, and value=list of email strings

RolesFromEmails grants roles to users according to the hardcoded emails.

ex:

roleMatchers=[
  util.RolesFromEmails(admins=["my@email.com"])
]

class buildbot.www.authz.roles.RolesFromOwner(roledict)¶

Parameters:	roledict -- dictionary with key=role, and value=list of email strings

RolesFromOwner grants a given role when property owner matches the email of the user

ex:

roleMatchers=[
    RolesFromOwner(role="owner")
]

Example Configs¶

Simple config which allows admin people to run everything:

from buildbot.plugins import *
authz = util.Authz(
  allowRules=[
    util.StopBuildEndpointMatcher(role="admins"),
    util.ForceBuildEndpointMatcher(role="admins"),
    util.RebuildBuildEndpointMatcher(role="admins")
  ],
  roleMatchers=[
    util.RolesFromEmails(admins=["my@email.com"])
  ]
)
auth=util.UserPasswordAuth({'my@email.com': 'mypass'})
c['www']['auth'] = auth
c['www']['authz'] = authz

More complex config with separation per branch:

from buildbot.plugins import *

authz = util.Authz(
    stringsMatcher=util.fnmatchStrMatcher,  # simple matcher with '*' glob character
    # stringsMatcher = util.reStrMatcher,   # if you prefer regular expressions
    allowRules=[
        # admins can do anything,
        # defaultDeny=False: if user does not have the admin role, we continue parsing rules
        util.AnyEndpointMatcher(role="admins", defaultDeny=False),

        StopBuildEndpointMatcher(role="owner"),

        # *-try groups can start "try" builds
        util.ForceBuildEndpointMatcher(builder="try", role="*-try"),
        # *-mergers groups can start "merge" builds
        util.ForceBuildEndpointMatcher(builder="merge", role="*-mergers"),
        # *-releasers groups can start "release" builds
        util.ForceBuildEndpointMatcher(builder="release", role="*-releasers"),
    ],
    roleMatchers=[
        RolesFromGroups(groupPrefix="buildbot-"),
        RolesFromEmails(admins=["homer@springfieldplant.com"],
                        reaper-try=["007@mi6.uk"]),
        # role owner is granted when property owner matches the email of the user
        RolesFromOwner(role="owner")
    ]
)
c['www']['authz'] = authz

2.4.12. Web Server¶

2.4.12.1. Authentication plugins¶

2.4.12.2. User Information¶

2.4.12.3. Reverse Proxy Configuration¶

2.4.12.4. Authorization rules¶

Endpoint matchers¶

Role matchers¶

Example Configs¶

Table Of Contents

Previous topic

Next topic

This Page

param accountBase:
param uri:	uri of the ldap server
param bindUser:	username of the ldap account that is used to get the infos for other users (usually a "faceless" account)
param bindPw:	password of the `bindUser`
	the base dn (distinguished name)of the user database
param accountPattern:
	the pattern for searching in the account database. This must contain the `%(username)s` string, which is replaced by the searched username
param accountFullName:
	the name of the field in account ldap database where the full user name is to be found.
param accountEmail:
	the name of the field in account ldap database where the user email is to be found.
param groupBase:
	the base dn of the groups database.
param groupMemberPattern:
	the pattern for searching in the group database. This must contain the `%(dn)s` string, which is replaced by the searched username's dn
param groupName:
	the name of the field in groups ldap database where the group name is to be found.
param avatarPattern:
	the pattern for searching avatars from emails in the account database. This must contain the `%(email)s` string, which is replaced by the searched email
param avatarData:
	the name of the field in groups ldap database where the avatar picture is to be found. This field is supposed to contain the raw picture, format is automatically detected from jpeg, png or git.
param accountExtraFields:
	extra fields to extracts for use with the authorization policies.