.. _Change-Sources: Change Sources -------------- A Version Control System maintains a source tree, and tells the buildmaster when it changes. The first step of each :class:`Build` is typically to acquire a copy of some version of this tree. This chapter describes how the Buildbot learns about what :class:`Change`\s have occurred. For more information on VC systems and :class:`Change`\s, see :ref:`Version-Control-Systems`. :class:`Change`\s can be provided by a variety of :class:`ChangeSource` types, although any given project will typically have only a single :class:`ChangeSource` active. This section provides a description of all available :class:`ChangeSource` types and explains how to set up each of them. In general, each Buildmaster watches a single source tree. It is possible to work around this, but true support for multi-tree builds remains elusive. .. _Choosing-a-Change-Source: Choosing a Change Source ~~~~~~~~~~~~~~~~~~~~~~~~ There are a variety of :class:`ChangeSource` classes available, some of which are meant to be used in conjunction with other tools to deliver :class:`Change` events from the VC repository to the buildmaster. As a quick guide, here is a list of VC systems and the :class:`ChangeSource`\s that might be useful with them. Note that some of these modules are in Buildbot's "contrib" directory, meaning that they have been offered by other users in hopes they may be useful, and might require some additional work to make them functional. CVS * :bb:chsrc:`CVSMaildirSource` (watching mail sent by ``contrib/buildbot_cvs_mail.py`` script) * :bb:chsrc:`PBChangeSource` (listening for connections from ``buildbot sendchange`` run in a loginfo script) * :bb:chsrc:`PBChangeSource` (listening for connections from a long-running :file:`contrib/viewcvspoll.py` polling process which examines the ViewCVS database directly * :bb:chsrc:`Change Hooks` in WebStatus SVN * :bb:chsrc:`PBChangeSource` (listening for connections from :file:`contrib/svn_buildbot.py` run in a postcommit script) * :bb:chsrc:`PBChangeSource` (listening for connections from a long-running :file:`contrib/svn_watcher.py` or :file:`contrib/svnpoller.py` polling process * :bb:chsrc:`SVNCommitEmailMaildirSource` (watching for email sent by :file:`commit-email.pl`) * :bb:chsrc:`SVNPoller` (polling the SVN repository) * :bb:chsrc:`Change Hooks` in WebStatus * :bb:chsrc:`GoogleCodeAtomPoller` (polling the commit feed for a GoogleCode Git repository) Darcs * :bb:chsrc:`PBChangeSource` (listening for connections from :file:`contrib/darcs_buildbot.py` in a commit script) * :bb:chsrc:`Change Hooks` in WebStatus Mercurial * :bb:chsrc:`PBChangeSource` (listening for connections from :file:`contrib/hg_buildbot.py` run in an 'changegroup' hook) * :bb:chsrc:`Change Hooks` in WebStatus * :bb:chsrc:`PBChangeSource` (listening for connections from :file:`buildbot/changes/hgbuildbot.py` run as an in-process 'changegroup' hook) * :bb:chsrc:`HgPoller` (polling a remote Mercurial repository) * :bb:chsrc:`GoogleCodeAtomPoller` (polling the commit feed for a GoogleCode Git repository) Bzr (the newer Bazaar) * :bb:chsrc:`PBChangeSource` (listening for connections from :file:`contrib/bzr_buildbot.py` run in a post-change-branch-tip or commit hook) * :bb:chsrc:`BzrPoller` (polling the Bzr repository) * :bb:chsrc:`Change Hooks` in WebStatus Git * :bb:chsrc:`PBChangeSource` (listening for connections from :file:`contrib/git_buildbot.py` run in the post-receive hook) * :bb:chsrc:`PBChangeSource` (listening for connections from :file:`contrib/github_buildbot.py`, which listens for notifications from GitHub) * :bb:chsrc:`Change Hooks` in WebStatus * github change hook (specifically designed for GitHub notifications, but requiring a publicly-accessible WebStatus) * :bb:chsrc:`GitPoller` (polling a remote git repository) * :bb:chsrc:`GoogleCodeAtomPoller` (polling the commit feed for a GoogleCode Git repository) Repo/Git * :bb:chsrc:`GerritChangeSource` connects to Gerrit via SSH to get a live stream of changes Monotone * :bb:chsrc:`PBChangeSource` (listening for connections from :file:`monotone-buildbot.lua`, which is available with monotone) All VC systems can be driven by a :bb:chsrc:`PBChangeSource` and the ``buildbot sendchange`` tool run from some form of commit script. If you write an email parsing function, they can also all be driven by a suitable :ref:`mail-parsing source `. Additionally, handlers for web-based notification (i.e. from GitHub) can be used with WebStatus' change_hook module. The interface is simple, so adding your own handlers (and sharing!) should be a breeze. See :bb:index:`chsrc` for a full list of change sources. .. index:: Change Sources .. bb:cfg:: change_source Configuring Change Sources ~~~~~~~~~~~~~~~~~~~~~~~~~~ The :bb:cfg:`change_source` configuration key holds all active change sources for the configuration. Most configurations have a single :class:`ChangeSource`, watching only a single tree, e.g., :: c['change_source'] = PBChangeSource() For more advanced configurations, the parameter can be a list of change sources:: source1 = ... source2 = ... c['change_source'] = [ source1, source1 ] Repository and Project ++++++++++++++++++++++ :class:`ChangeSource`\s will, in general, automatically provide the proper :attr:`repository` attribute for any changes they produce. For systems which operate on URL-like specifiers, this is a repository URL. Other :class:`ChangeSource`\s adapt the concept as necessary. Many :class:`ChangeSource`\s allow you to specify a project, as well. This attribute is useful when building from several distinct codebases in the same buildmaster: the project string can serve to differentiate the different codebases. :class:`Scheduler`\s can filter on project, so you can configure different builders to run for each project. .. _Mail-parsing-ChangeSources: Mail-parsing ChangeSources ~~~~~~~~~~~~~~~~~~~~~~~~~~ Many projects publish information about changes to their source tree by sending an email message out to a mailing list, frequently named :samp:`{PROJECT}-commits` or :samp:`{PROJECT}-changes`. Each message usually contains a description of the change (who made the change, which files were affected) and sometimes a copy of the diff. Humans can subscribe to this list to stay informed about what's happening to the source tree. The Buildbot can also be subscribed to a `-commits` mailing list, and can trigger builds in response to Changes that it hears about. The buildmaster admin needs to arrange for these email messages to arrive in a place where the buildmaster can find them, and configure the buildmaster to parse the messages correctly. Once that is in place, the email parser will create Change objects and deliver them to the Schedulers (see :ref:`Schedulers`) just like any other ChangeSource. There are two components to setting up an email-based ChangeSource. The first is to route the email messages to the buildmaster, which is done by dropping them into a `maildir`. The second is to actually parse the messages, which is highly dependent upon the tool that was used to create them. Each VC system has a collection of favorite change-emailing tools, and each has a slightly different format, so each has a different parsing function. There is a separate ChangeSource variant for each parsing function. Once you've chosen a maildir location and a parsing function, create the change source and put it in ``change_source`` :: from buildbot.changes.mail import CVSMaildirSource c['change_source'] = CVSMaildirSource("~/maildir-buildbot", prefix="/trunk/") .. _Subscribing-the-Buildmaster: Subscribing the Buildmaster +++++++++++++++++++++++++++ The recommended way to install the buildbot is to create a dedicated account for the buildmaster. If you do this, the account will probably have a distinct email address (perhaps `buildmaster@example.org`). Then just arrange for this account's email to be delivered to a suitable maildir (described in the next section). If the buildbot does not have its own account, `extension addresses` can be used to distinguish between email intended for the buildmaster and email intended for the rest of the account. In most modern MTAs, the e.g. `foo@example.org` account has control over every email address at example.org which begins with "foo", such that email addressed to `account-foo@example.org` can be delivered to a different destination than `account-bar@example.org`. qmail does this by using separate :file:`.qmail` files for the two destinations (:file:`.qmail-foo` and :file:`.qmail-bar`, with :file:`.qmail` controlling the base address and :file:`.qmail-default` controlling all other extensions). Other MTAs have similar mechanisms. Thus you can assign an extension address like `foo-buildmaster@example.org` to the buildmaster, and retain `foo@example.org` for your own use. .. _Using-Maildirs: Using Maildirs ++++++++++++++ A `maildir` is a simple directory structure originally developed for qmail that allows safe atomic update without locking. Create a base directory with three subdirectories: :file:`new`, :file:`tmp`, and :file:`cur`. When messages arrive, they are put into a uniquely-named file (using pids, timestamps, and random numbers) in :file:`tmp`. When the file is complete, it is atomically renamed into :file:`new`. Eventually the buildmaster notices the file in :file:`new`, reads and parses the contents, then moves it into :file:`cur`. A cronjob can be used to delete files in :file:`cur` at leisure. Maildirs are frequently created with the :command:`maildirmake` tool, but a simple :command:`mkdir -p ~/MAILDIR/\{cur,new,tmp\}` is pretty much equivalent. Many modern MTAs can deliver directly to maildirs. The usual :file:`.forward` or :file:`.procmailrc` syntax is to name the base directory with a trailing slash, so something like ``~/MAILDIR/``\. qmail and postfix are maildir-capable MTAs, and procmail is a maildir-capable MDA (Mail Delivery Agent). Here is an example procmail config, located in :file:`~/.procmailrc`:: # .procmailrc # routes incoming mail to appropriate mailboxes PATH=/usr/bin:/usr/local/bin MAILDIR=$HOME/Mail LOGFILE=.procmail_log SHELL=/bin/sh :0 * new If procmail is not setup on a system wide basis, then the following one-line :file:`.forward` file will invoke it. :: !/usr/bin/procmail For MTAs which cannot put files into maildirs directly, the `safecat` tool can be executed from a :file:`.forward` file to accomplish the same thing. The Buildmaster uses the linux DNotify facility to receive immediate notification when the maildir's :file:`new` directory has changed. When this facility is not available, it polls the directory for new messages, every 10 seconds by default. .. _Parsing-Email-Change-Messages: Parsing Email Change Messages +++++++++++++++++++++++++++++ The second component to setting up an email-based :class:`ChangeSource` is to parse the actual notices. This is highly dependent upon the VC system and commit script in use. A couple of common tools used to create these change emails, along with the buildbot tools to parse them, are: CVS Buildbot CVS MailNotifier :bb:chsrc:`CVSMaildirSource` SVN svnmailer http://opensource.perlig.de/en/svnmailer/ :file:`commit-email.pl` :bb:chsrc:`SVNCommitEmailMaildirSource` Bzr Launchpad :bb:chsrc:`BzrLaunchpadEmailMaildirSource` Mercurial NotifyExtension http://www.selenic.com/mercurial/wiki/index.cgi/NotifyExtension Git post-receive-email http://git.kernel.org/?p=git/git.git;a=blob;f=contrib/hooks/post-receive-email;hb=HEAD The following sections describe the parsers available for each of these tools. Most of these parsers accept a ``prefix=`` argument, which is used to limit the set of files that the buildmaster pays attention to. This is most useful for systems like CVS and SVN which put multiple projects in a single repository (or use repository names to indicate branches). Each filename that appears in the email is tested against the prefix: if the filename does not start with the prefix, the file is ignored. If the filename *does* start with the prefix, that prefix is stripped from the filename before any further processing is done. Thus the prefix usually ends with a slash. .. bb:chsrc:: CVSMaildirSource .. _CVSMaildirSource: CVSMaildirSource ++++++++++++++++ .. py:class:: buildbot.changes.mail.CVSMaildirSource This parser works with the :file:`buildbot_cvs_maildir.py` script in the contrib directory. The script sends an email containing all the files submitted in one directory. It is invoked by using the :file:`CVSROOT/loginfo` facility. The Buildbot's :bb:chsrc:`CVSMaildirSource` knows how to parse these messages and turn them into Change objects. It takes the directory name of the maildir root. For example:: from buildbot.changes.mail import CVSMaildirSource c['change_source'] = CVSMaildirSource("/home/buildbot/Mail") Configuration of CVS and buildbot_cvs_mail.py ############################################# CVS must be configured to invoke the buildbot_cvs_mail.py script when files are checked in. This is done via the CVS loginfo configuration file. To update this, first do:: cvs checkout CVSROOT cd to the CVSROOT directory and edit the file loginfo, adding a line like:: SomeModule /cvsroot/CVSROOT/buildbot_cvs_mail.py --cvsroot :ext:example.com:/cvsroot -e buildbot -P SomeModule %@{sVv@} .. note:: For cvs version 1.12.x, the ``--path %p`` option is required. Version 1.11.x and 1.12.x report the directory path differently. The above example you put the buildbot_cvs_mail.py script under /cvsroot/CVSROOT. It can be anywhere. Run the script with --help to see all the options. At the very least, the options ``-e`` (email) and ``-P`` (project) should be specified. The line must end with ``%{sVv}`` This is expanded to the files that were modified. Additional entries can be added to support more modules. See :command:`buildbot_cvs_mail.py --help`` for more information on the available options. .. bb:chsrc:: SVNCommitEmailMaildirSource .. _SVNCommitEmailMaildirSource: SVNCommitEmailMaildirSource ++++++++++++++++++++++++++++ .. py:class:: buildbot.changes.mail.SVNCommitEmailMaildirSource :bb:chsrc:`SVNCommitEmailMaildirSource` parses message sent out by the :file:`commit-email.pl` script, which is included in the Subversion distribution. It does not currently handle branches: all of the Change objects that it creates will be associated with the default (i.e. trunk) branch. :: from buildbot.changes.mail import SVNCommitEmailMaildirSource c['change_source'] = SVNCommitEmailMaildirSource("~/maildir-buildbot") .. bb:chsrc:: BzrLaunchpadEmailMaildirSource .. _BzrLaunchpadEmailMaildirSource: BzrLaunchpadEmailMaildirSource +++++++++++++++++++++++++++++++ .. py:class:: buildbot.changes.mail.BzrLaunchpadEmailMaildirSource :bb:chsrc:`BzrLaunchpadEmailMaildirSource` parses the mails that are sent to addresses that subscribe to branch revision notifications for a bzr branch hosted on Launchpad. The branch name defaults to :samp:`lp:{Launchpad path}`. For example ``lp:~maria-captains/maria/5.1``. If only a single branch is used, the default branch name can be changed by setting ``defaultBranch``. For multiple branches, pass a dictionary as the value of the ``branchMap`` option to map specific repository paths to specific branch names (see example below). The leading ``lp:`` prefix of the path is optional. The ``prefix`` option is not supported (it is silently ignored). Use the ``branchMap`` and ``defaultBranch`` instead to assign changes to branches (and just do not subscribe the buildbot to branches that are not of interest). The revision number is obtained from the email text. The bzr revision id is not available in the mails sent by Launchpad. However, it is possible to set the bzr `append_revisions_only` option for public shared repositories to avoid new pushes of merges changing the meaning of old revision numbers. :: from buildbot.changes.mail import BzrLaunchpadEmailMaildirSource bm = { 'lp:~maria-captains/maria/5.1' : '5.1', 'lp:~maria-captains/maria/6.0' : '6.0' } c['change_source'] = BzrLaunchpadEmailMaildirSource("~/maildir-buildbot", branchMap = bm) .. bb:chsrc:: PBChangeSource .. _PBChangeSource: PBChangeSource ~~~~~~~~~~~~~~ .. py:class:: buildbot.changes.pb.PBChangeSource :bb:chsrc:`PBChangeSource` actually listens on a TCP port for clients to connect and push change notices *into* the Buildmaster. This is used by the built-in ``buildbot sendchange`` notification tool, as well as several version-control hook scripts. This change is also useful for creating new kinds of change sources that work on a `push` model instead of some kind of subscription scheme, for example a script which is run out of an email :file:`.forward` file. This ChangeSource always runs on the same TCP port as the slaves. It shares the same protocol, and in fact shares the same space of "usernames", so you cannot configure a :bb:chsrc:`PBChangeSource` with the same name as a slave. If you have a publicly accessible slave port, and are using :bb:chsrc:`PBChangeSource`, *you must establish a secure username and password for the change source*. If your sendchange credentials are known (e.g., the defaults), then your buildmaster is susceptible to injection of arbitrary changes, which (depending on the build factories) could lead to arbitrary code execution on buildslaves. The :bb:chsrc:`PBChangeSource` is created with the following arguments. ``port`` which port to listen on. If ``None`` (which is the default), it shares the port used for buildslave connections. ``user`` The user account that the client program must use to connect. Defaults to ``change`` ``passwd`` The password for the connection - defaults to ``changepw``. Do not use this default on a publicly exposed port! ``prefix`` The prefix to be found and stripped from filenames delivered over the connection, defaulting to ``None``. Any filenames which do not start with this prefix will be removed. If all the filenames in a given Change are removed, the that whole Change will be dropped. This string should probably end with a directory separator. This is useful for changes coming from version control systems that represent branches as parent directories within the repository (like SVN and Perforce). Use a prefix of ``trunk/`` or ``project/branches/foobranch/`` to only follow one branch and to get correct tree-relative filenames. Without a prefix, the :bb:chsrc:`PBChangeSource` will probably deliver Changes with filenames like :file:`trunk/foo.c` instead of just :file:`foo.c`. Of course this also depends upon the tool sending the Changes in (like :bb:cmdline:`buildbot sendchange `) and what filenames it is delivering: that tool may be filtering and stripping prefixes at the sending end. For example:: from buildbot.changes import pb c['change_source'] = pb.PBChangeSource(port=9999, user='laura', passwd='fpga') The following hooks are useful for sending changes to a :bb:chsrc:`PBChangeSource`\: .. _Mercurial-Hook: Mercurial Hook ++++++++++++++ Since Mercurial is written in python, the hook script can invoke Buildbot's :meth:`sendchange` function directly, rather than having to spawn an external process. This function delivers the same sort of changes as :command:`buildbot sendchange` and the various hook scripts in :file:`contrib/`, so you'll need to add a :bb:chsrc:`PBChangeSource` to your buildmaster to receive these changes. To set this up, first choose a Mercurial repository that represents your central `official` source tree. This will be the same repository that your buildslaves will eventually pull from. Install Buildbot on the machine that hosts this repository, using the same version of python as Mercurial is using (so that the Mercurial hook can import code from buildbot). Then add the following to the :file:`.hg/hgrc` file in that repository, replacing the buildmaster hostname/portnumber as appropriate for your buildbot: .. code-block:: ini [hooks] changegroup.buildbot = python:buildbot.changes.hgbuildbot.hook [hgbuildbot] master = buildmaster.example.org:9987 # .. other hgbuildbot parameters .. The ``master`` configuration key allows to have more than one buildmaster specification. The buildmasters have to be separated by a whitspace or comma (see also 'hg help config'): .. code-block:: ini master = buildmaster.example.org:9987 buildmaster2.example.org:9989 .. note:: Mercurial lets you define multiple ``changegroup`` hooks by giving them distinct names, like ``changegroup.foo`` and ``changegroup.bar``, which is why we use ``changegroup.buildbot`` in this example. There is nothing magical about the `buildbot` suffix in the hook name. The ``[hgbuildbot]`` section *is* special, however, as it is the only section that the buildbot hook pays attention to.) Also note that this runs as a ``changegroup`` hook, rather than as an ``incoming`` hook. The ``changegroup`` hook is run with multiple revisions at a time (say, if multiple revisions are being pushed to this repository in a single :command:`hg push` command), whereas the ``incoming`` hook is run with just one revision at a time. The ``hgbuildbot.hook`` function will only work with the ``changegroup`` hook. Changes' attribute ``properties`` has an entry ``is_merge`` which is set to true when the change was caused by a merge. Authentication ############## If the buildmaster :bb:chsrc:`PBChangeSource` is configured to require sendchange credentials then you can set these with the ``auth`` parameter. When this parameter is not set it defaults to ``change:changepw``, which are the defaults for the ``user`` and ``password`` values of a ``PBChangeSource`` which doesn't require authentication. .. code-block:: ini [hgbuildbot] auth = clientname:supersecret # ... You can set this parameter in either the global :file:`/etc/mercurial/hgrc`, your personal :file:`~/.hgrc` file or the repository local :file:`.hg/hgrc` file. But since this value is stored in plain text, you must make sure that it can only be read by those users that need to know the authentication credentials. Branch Type ########### The ``[hgbuildbot]`` section has two other parameters that you might specify, both of which control the name of the branch that is attached to the changes coming from this hook. One common branch naming policy for Mercurial repositories is to use Mercurial's built-in branches (the kind created with :command:`hg branch` and listed with :command:`hg branches`). This feature associates persistent names with particular lines of descent within a single repository. (note that the buildbot ``source.Mercurial`` checkout step does not yet support this kind of branch). To have the commit hook deliver this sort of branch name with the Change object, use ``branchtype = inrepo``, this is the default behavior: .. code-block:: ini [hgbuildbot] branchtype = inrepo # ... Another approach is for each branch to go into a separate repository, and all the branches for a single project share a common parent directory. For example, you might have :file:`/var/repos/{PROJECT}/trunk/` and :file:`/var/repos/{PROJECT}/release`. To use this style, use the ``branchtype = dirname`` setting, which simply uses the last component of the repository's enclosing directory as the branch name: .. code-block:: ini [hgbuildbot] branchtype = dirname # ... Finally, if you want to simply specify the branchname directly, for all changes, use ``branch = BRANCHNAME``. This overrides ``branchtype``: .. code-block:: ini [hgbuildbot] branch = trunk # ... If you use ``branch=`` like this, you'll need to put a separate :file:`.hgrc` in each repository. If you use ``branchtype=``, you may be able to use the same :file:`.hgrc` for all your repositories, stored in :file:`~/.hgrc` or :file:`/etc/mercurial/hgrc`. Compatibility ############# As twisted needs to hook some signals, and some web servers strictly forbid that, the parameter ``fork`` in the ``[hgbuildbot]`` section will instruct mercurial to fork before sending the change request. Then as the created process will be of short life, it is considered as safe to disable the signal restriction in the Apache setting like that ``WSGIRestrictSignal Off``. Refer to the documentation of your web server for other way to do the same. Resulting Changes ################# The ``category`` parameter sets the category for any changes generated from the hook. Likewise, the ``project`` parameter sets the project. Changes' ``repository`` attributes are formed from the Mercurial repo path by stripping ``strip`` slashes on the left, then prepending the ``baseurl``. For example, assume the following parameters: .. code-block:: ini [hgbuildbot] baseurl = http://hg.myorg.com/repos/ strip = 3 # ... Then a repopath of ``/var/repos/myproject/release`` would have its left 3 slashes stripped, leaving ``myproject/release``, after which the base URL would be prepended, to create ``http://hg.myorg.com/repos/myproject/release``. The ``hgbuildbot`` ``baseurl`` value defaults to the value of the same parameter in the ``web`` section of the configuration. .. note:: older versions of Buildbot created repository strings that did not contain an entire URL. To continue this pattern, set the ``hgbuildbot`` ``baseurl`` parameter to an empty string: .. code-block:: ini [hgbuildbot] baseurl = http://hg.myorg.com/repos/ .. _Bzr-Hook: Bzr Hook ++++++++ Bzr is also written in Python, and the Bzr hook depends on Twisted to send the changes. To install, put :file:`contrib/bzr_buildbot.py` in one of your plugins locations a bzr plugins directory (e.g., :file:`~/.bazaar/plugins`). Then, in one of your bazaar conf files (e.g., :file:`~/.bazaar/locations.conf`), set the location you want to connect with buildbot with these keys: * ``buildbot_on`` one of 'commit', 'push, or 'change'. Turns the plugin on to report changes via commit, changes via push, or any changes to the trunk. 'change' is recommended. * ``buildbot_server`` (required to send to a buildbot master) the URL of the buildbot master to which you will connect (as of this writing, the same server and port to which slaves connect). * ``buildbot_port`` (optional, defaults to 9989) the port of the buildbot master to which you will connect (as of this writing, the same server and port to which slaves connect) * ``buildbot_pqm`` (optional, defaults to not pqm) Normally, the user that commits the revision is the user that is responsible for the change. When run in a pqm (Patch Queue Manager, see https://launchpad.net/pqm) environment, the user that commits is the Patch Queue Manager, and the user that committed the *parent* revision is responsible for the change. To turn on the pqm mode, set this value to any of (case-insensitive) "Yes", "Y", "True", or "T". * ``buildbot_dry_run`` (optional, defaults to not a dry run) Normally, the post-commit hook will attempt to communicate with the configured buildbot server and port. If this parameter is included and any of (case-insensitive) "Yes", "Y", "True", or "T", then the hook will simply print what it would have sent, but not attempt to contact the buildbot master. * ``buildbot_send_branch_name`` (optional, defaults to not sending the branch name) If your buildbot's bzr source build step uses a repourl, do *not* turn this on. If your buildbot's bzr build step uses a baseURL, then you may set this value to any of (case-insensitive) "Yes", "Y", "True", or "T" to have the buildbot master append the branch name to the baseURL. .. note:: The bzr smart server (as of version 2.2.2) doesn't know how to resolve ``bzr://`` urls into absolute paths so any paths in ``locations.conf`` won't match, hence no change notifications will be sent to Buildbot. Setting configuration parameters globally or in-branch might still work. When buildbot no longer has a hardcoded password, it will be a configuration option here as well. Here's a simple example that you might have in your :file:`~/.bazaar/locations.conf`\. .. code-block:: ini [chroot-*:///var/local/myrepo/mybranch] buildbot_on = change buildbot_server = localhost .. bb:chsrc:: P4Source .. _P4Source: P4Source ~~~~~~~~ The :bb:chsrc:`P4Source` periodically polls a `Perforce `_ depot for changes. It accepts the following arguments: ``p4base`` The base depot path to watch, without the trailing '/...'. ``p4port`` The Perforce server to connect to (as :samp:`{host}:{port}`). ``p4user`` The Perforce user. ``p4passwd`` The Perforce password. ``p4bin`` An optional string parameter. Specify the location of the perforce command line binary (p4). You only need to do this if the perforce binary is not in the path of the buildbot user. Defaults to `p4`. ``split_file`` A function that maps a pathname, without the leading ``p4base``, to a (branch, filename) tuple. The default just returns ``(None, branchfile)``, which effectively disables branch support. You should supply a function which understands your repository structure. ``pollinterval`` How often to poll, in seconds. Defaults to 600 (10 minutes). ``histmax`` The maximum number of changes to inspect at a time. If more than this number occur since the last poll, older changes will be silently ignored. ``encoding`` The character encoding of ``p4``\'s output. This defaults to "utf8", but if your commit messages are in another encoding, specify that here. Example +++++++ This configuration uses the :envvar:`P4PORT`, :envvar:`P4USER`, and :envvar:`P4PASSWD` specified in the buildmaster's environment. It watches a project in which the branch name is simply the next path component, and the file is all path components after. :: from buildbot.changes import p4poller s = p4poller.P4Source(p4base='//depot/project/', split_file=lambda branchfile: branchfile.split('/',1), ) c['change_source'] = s .. bb:chsrc:: BonsaiPoller .. _BonsaiPoller: BonsaiPoller ~~~~~~~~~~~~ The :bb:chsrc:`BonsaiPoller` periodically polls a Bonsai server. This is a CGI script accessed through a web server that provides information about a CVS tree, for example the Mozilla bonsai server at http://bonsai.mozilla.org. Bonsai servers are usable by both humans and machines. In this case, the buildbot's change source forms a query which asks about any files in the specified branch which have changed since the last query. :bb:chsrc:`BonsaiPoller` accepts the following arguments: ``bonsaiURL`` The base URL of the Bonsai server, e.g., ``http://bonsai.mozilla.org`` ``module`` The module to look for changes in. Commonly this is ``all``. ``branch`` The branch to look for changes in. This will appear in the ``branch`` field of the resulting change objects. ``tree`` The tree to look for changes in. Commonly this is ``all``. ``cvsroot`` The CVS root of the repository. Usually this is ``/cvsroot``. ``pollInterval`` The time (in seconds) between queries for changes. ``project`` The project name to attach to all change objects produced by this change source. .. bb:chsrc:: SVNPoller .. _SVNPoller: SVNPoller ~~~~~~~~~ .. py:class:: buildbot.changes.svnpoller.SVNPoller The :bb:chsrc:`SVNPoller` is a ChangeSource which periodically polls a `Subversion `_ repository for new revisions, by running the ``svn log`` command in a subshell. It can watch a single branch or multiple branches. :bb:chsrc:`SVNPoller` accepts the following arguments: ``svnurl`` The base URL path to watch, like ``svn://svn.twistedmatrix.com/svn/Twisted/trunk``, or ``http://divmod.org/svn/Divmo/``, or even ``file:///home/svn/Repository/ProjectA/branches/1.5/``. This must include the access scheme, the location of the repository (both the hostname for remote ones, and any additional directory names necessary to get to the repository), and the sub-path within the repository's virtual filesystem for the project and branch of interest. The :bb:chsrc:`SVNPoller` will only pay attention to files inside the subdirectory specified by the complete svnurl. ``split_file`` A function to convert pathnames into ``(branch, relative_pathname)`` tuples. Use this to explain your repository's branch-naming policy to :bb:chsrc:`SVNPoller`. This function must accept a single string (the pathname relative to the repository) and return a two-entry tuple. Directory pathnames always end with a right slash to distinguish them from files, like ``trunk/src/``, or ``src/``. There are a few utility functions in :mod:`buildbot.changes.svnpoller` that can be used as a :meth:`split_file` function; see below for details. For directories, the relative pathname returned by :meth:`split_file` should end with a right slash but an empty string is also accepted for the root, like ``("branches/1.5.x", "")`` being converted from ``"branches/1.5.x/"``. The default value always returns ``(None, path)``, which indicates that all files are on the trunk. Subclasses of :bb:chsrc:`SVNPoller` can override the :meth:`split_file` method instead of using the ``split_file=`` argument. ``project`` Set the name of the project to be used for the :bb:chsrc:`SVNPoller`. This will then be set in any changes generated by the :bb:chsrc:`SVNPoller`, and can be used in a :ref:`Change Filter ` for triggering particular builders. ``svnuser`` An optional string parameter. If set, the :option:`--user` argument will be added to all :command:`svn` commands. Use this if you have to authenticate to the svn server before you can do :command:`svn info` or :command:`svn log` commands. ``svnpasswd`` Like ``svnuser``, this will cause a :option:`--password` argument to be passed to all :command:`svn` commands. ``pollinterval`` How often to poll, in seconds. Defaults to 600 (checking once every 10 minutes). Lower this if you want the buildbot to notice changes faster, raise it if you want to reduce the network and CPU load on your svn server. Please be considerate of public SVN repositories by using a large interval when polling them. ``histmax`` The maximum number of changes to inspect at a time. Every ``pollinterval`` seconds, the :bb:chsrc:`SVNPoller` asks for the last ``histmax`` changes and looks through them for any revisions it does not already know about. If more than ``histmax`` revisions have been committed since the last poll, older changes will be silently ignored. Larger values of ``histmax`` will cause more time and memory to be consumed on each poll attempt. ``histmax`` defaults to 100. ``svnbin`` This controls the :command:`svn` executable to use. If subversion is installed in a weird place on your system (outside of the buildmaster's :envvar:`PATH`), use this to tell :bb:chsrc:`SVNPoller` where to find it. The default value of `svn` will almost always be sufficient. ``revlinktmpl`` This parameter is deprecated in favour of specifying a global revlink option. This parameter allows a link to be provided for each revision (for example, to websvn or viewvc). These links appear anywhere changes are shown, such as on build or change pages. The proper form for this parameter is an URL with the portion that will substitute for a revision number replaced by ''%s''. For example, ``'http://myserver/websvn/revision.php?rev=%s'`` could be used to cause revision links to be created to a websvn repository viewer. ``cachepath`` If specified, this is a pathname of a cache file that :bb:chsrc:`SVNPoller` will use to store its state between restarts of the master. ``extra_args`` If specified, the extra arguments will be added to the svn command args. Several split file functions are available for common SVN repository layouts. For a poller that is only monitoring trunk, the default split file function is available explicitly as ``split_file_alwaystrunk``:: from buildbot.changes.svnpoller import SVNPoller from buildbot.changes.svnpoller import split_file_alwaystrunk c['change_source'] = SVNPoller( svnurl="svn://svn.twistedmatrix.com/svn/Twisted/trunk", split_file=split_file_alwaystrunk) For repositories with the ``/trunk`` and ``/branches/{BRANCH}`` layout, ``split_file_branches`` will do the job:: from buildbot.changes.svnpoller import SVNPoller from buildbot.changes.svnpoller import split_file_branches c['change_source'] = SVNPoller( svnurl="https://amanda.svn.sourceforge.net/svnroot/amanda/amanda", split_file=split_file_branches) When using this splitter the poller will set the ``project`` attribute of any changes to the ``project`` attribute of the poller. For repositories with the ``{PROJECT}/trunk`` and ``{PROJECT}/branches/{BRANCH}`` layout, ``split_file_projects_branches`` will do the job:: from buildbot.changes.svnpoller import SVNPoller from buildbot.changes.svnpoller import split_file_projects_branches c['change_source'] = SVNPoller( svnurl="https://amanda.svn.sourceforge.net/svnroot/amanda/", split_file=split_file_projects_branches) When using this splitter the poller will set the ``project`` attribute of any changes to the project determined by the splitter. The :bb:chsrc:`SVNPoller` is highly adaptable to various Subversion layouts. See :ref:`Customizing-SVNPoller` for details and some common scenarios. .. bb:chsrc:: BzrPoller .. _Bzr-Poller: Bzr Poller ~~~~~~~~~~ If you cannot insert a Bzr hook in the server, you can use the Bzr Poller. To use, put :file:`contrib/bzr_buildbot.py` somewhere that your buildbot configuration can import it. Even putting it in the same directory as the :file:`master.cfg` should work. Install the poller in the buildbot configuration as with any other change source. Minimally, provide a URL that you want to poll (``bzr://``, ``bzr+ssh://``, or ``lp:``), making sure the buildbot user has necessary privileges. :: # bzr_buildbot.py in the same directory as master.cfg from bzr_buildbot import BzrPoller c['change_source'] = BzrPoller( url='bzr://hostname/my_project', poll_interval=300) The ``BzrPoller`` parameters are: ``url`` The URL to poll. ``poll_interval`` The number of seconds to wait between polls. Defaults to 10 minutes. ``branch_name`` Any value to be used as the branch name. Defaults to None, or specify a string, or specify the constants from :file:`bzr_buildbot.py` ``SHORT`` or ``FULL`` to get the short branch name or full branch address. ``blame_merge_author`` normally, the user that commits the revision is the user that is responsible for the change. When run in a pqm (Patch Queue Manager, see https://launchpad.net/pqm) environment, the user that commits is the Patch Queue Manager, and the user that committed the merged, *parent* revision is responsible for the change. set this value to ``True`` if this is pointed against a PQM-managed branch. .. bb:chsrc:: GitPoller .. _GitPoller: GitPoller ~~~~~~~~~ If you cannot take advantage of post-receive hooks as provided by :file:`contrib/git_buildbot.py` for example, then you can use the :bb:chsrc:`GitPoller`. The :bb:chsrc:`GitPoller` periodically fetches from a remote git repository and processes any changes. It requires its own working directory for operation. The default should be adequate, but it can be overridden via the ``workdir`` property. .. note:: There can only be a single `GitPoller` pointed at any given repository. The :bb:chsrc:`GitPoller` requires git-1.7 and later. It accepts the following arguments: ``repourl`` the git-url that describes the remote repository, e.g. ``git@example.com:foobaz/myrepo.git`` (see the :command:`git fetch` help for more info on git-url formats) ``branches`` a list of the branches to fetch, will default to ``['master']`` ``branch`` accepts a single branch name to fetch. Exists for backwards compatibility with old configurations. ``pollinterval`` interval in seconds between polls, default is 10 minutes ``gitbin`` path to the git binary, defaults to just ``'git'`` ``category`` Set the category to be used for the changes produced by the :bb:chsrc:`GitPoller`. This will then be set in any changes generated by the :bb:chsrc:`GitPoller`, and can be used in a Change Filter for triggering particular builders. ``project`` Set the name of the project to be used for the :bb:chsrc:`GitPoller`. This will then be set in any changes generated by the ``GitPoller``, and can be used in a Change Filter for triggering particular builders. ``usetimestamps`` parse each revision's commit timestamp (default is ``True``), or ignore it in favor of the current time (so recently processed commits appear together in the waterfall page) ``encoding`` Set encoding will be used to parse author's name and commit message. Default encoding is ``'utf-8'``. This will not be applied to file names since git will translate non-ascii file names to unreadable escape sequences. ``workdir`` the directory where the poller should keep its local repository. The default is :samp:`gitpoller_work`. If this is a relative path, it will be interpreted relative to the master's basedir. Multiple git pollers can share the same directory. An configuration for the git poller might look like this:: from buildbot.changes.gitpoller import GitPoller c['change_source'] = GitPoller('git@example.com:foobaz/myrepo.git', branches=['master', 'great_new_feature']) .. bb:chsrc:: HgPoller .. _HgPoller: HgPoller ~~~~~~~~ If you cannot take advantage of post-receive hooks as provided by :file:`buildbot/changes/hgbuildbot.py` for example, then you can use the :bb:chsrc:`HgPoller`. The :bb:chsrc:`HgPoller` periodically pulls a named branch from a remote Mercurial repository and processes any changes. It requires its own working directory for operation, which must be specified via the ``workdir`` property. The :bb:chsrc:`HgPoller` requires a working ``hg`` executable, and at least a read-only access to the repository it polls (possibly through ssh keys or by tweaking the ``hgrc`` of the system user buildbot runs as). The :bb:chsrc:`HgPoller` will not transmit any change if there are several heads on the watched named branch. This is similar (although not identical) to the Mercurial executable behaviour. This exceptional condition is usually the result of a developer mistake, and usually does not last for long. It is reported in logs. If fixed by a later merge, the buildmaster administrator does not have anything to do: that merge will be transmitted, together with the intermediate ones. The :bb:chsrc:`HgPoller` accepts the following arguments: ``repourl`` the url that describes the remote repository, e.g. ``http://hg.example.com/projects/myrepo``. Any url suitable for ``hg pull`` can be specified. ``branch`` the desired branch to pull, will default to ``'default'`` ``workdir`` the directory where the poller should keep its local repository. It is mandatory for now, although later releases may provide a meaningful default. It also serves to identify the poller in the buildmaster internal database. Changing it may result in re-processing all changes so far. Several :bb:chsrc:`HgPoller` instances may share the same ``workdir`` for mutualisation of the common history between two different branches, thus easing on local and remote system resources and bandwidth. If relative, the ``workdir`` will be interpreted from the master directory. ``pollinterval`` interval in seconds between polls, default is 10 minutes ``hgbin`` path to the Mercurial binary, defaults to just ``'hg'`` ``category`` Set the category to be used for the changes produced by the :bb:chsrc:`HgPoller`. This will then be set in any changes generated by the :bb:chsrc:`HgPoller`, and can be used in a Change Filter for triggering particular builders. ``project`` Set the name of the project to be used for the :bb:chsrc:`HgPoller`. This will then be set in any changes generated by the ``HgPoller``, and can be used in a Change Filter for triggering particular builders. ``usetimestamps`` parse each revision's commit timestamp (default is ``True``), or ignore it in favor of the current time (so recently processed commits appear together in the waterfall page) ``encoding`` Set encoding will be used to parse author's name and commit message. Default encoding is ``'utf-8'``. A configuration for the Mercurial poller might look like this:: from buildbot.changes.hgpoller import HgPoller c['change_source'] = HgPoller('http://hg.example.org/projects/myrepo', branch='great_new_feature', workdir='hg-myrepo') .. bb:chsrc:: GerritChangeSource .. _GerritChangeSource: GerritChangeSource ~~~~~~~~~~~~~~~~~~ .. py:class:: buildbot.changes.gerritchangesource.GerritChangeSource The :bb:chsrc:`GerritChangeSource` class connects to a Gerrit server by its SSH interface and uses its event source mechanism, `gerrit stream-events `_. This class adds a change to the buildbot system for each of the following events: ``patchset-created`` A change is proposed for review. Automatic checks like :file:`checkpatch.pl` can be automatically triggered. Beware of what kind of automatic task you trigger. At this point, no trusted human has reviewed the code, and a patch could be specially crafted by an attacker to compromise your buildslaves. ``ref-updated`` A change has been merged into the repository. Typically, this kind of event can lead to a complete rebuild of the project, and upload binaries to an incremental build results server. This class will populate the property list of the triggered build with the info received from Gerrit server in JSON format. .. index:: Properties; from GerritChangeSource In case of ``patchset-created`` event, these properties will be: ``event.change.branch`` Branch of the Change ``event.change.id`` Change's ID in the Gerrit system (the ChangeId: in commit comments) ``event.change.number`` Change's number in Gerrit system ``event.change.owner.email`` Change's owner email (owner is first uploader) ``event.change.owner.name`` Change's owner name ``event.change.project`` Project of the Change ``event.change.subject`` Change's subject ``event.change.url`` URL of the Change in the Gerrit's web interface ``event.patchSet.number`` Patchset's version number ``event.patchSet.ref`` Patchset's Gerrit "virtual branch" ``event.patchSet.revision`` Patchset's Git commit ID ``event.patchSet.uploader.email`` Patchset uploader's email (owner is first uploader) ``event.patchSet.uploader.name`` Patchset uploader's name (owner is first uploader) ``event.type`` Event type (``patchset-created``) ``event.uploader.email`` Patchset uploader's email ``event.uploader.name`` Patchset uploader's name In case of ``ref-updated`` event, these properties will be: ``event.refUpdate.newRev`` New Git commit ID (after merger) ``event.refUpdate.oldRev`` Previous Git commit ID (before merger) ``event.refUpdate.project`` Project that was updated ``event.refUpdate.refName`` Branch that was updated ``event.submitter.email`` Submitter's email (merger responsible) ``event.submitter.name`` Submitter's name (merger responsible) ``event.type`` Event type (``ref-updated``) ``event.submitter.email`` Submitter's email (merger responsible) ``event.submitter.name`` Submitter's name (merger responsible) A configuration for this source might look like:: from buildbot.changes.gerritchangesource import GerritChangeSource c['change_source'] = GerritChangeSource(gerrit_server, gerrit_user) see :file:`master/docs/examples/repo_gerrit.cfg` in the Buildbot distribution for a full example setup of :bb:chsrc:`GerritChangeSource`. .. bb:chsrc:: Change Hooks .. _Change-Hooks-HTTP-Notifications: Change Hooks (HTTP Notifications) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Buildbot already provides a web frontend, and that frontend can easily be used to receive HTTP push notifications of commits from services like GitHub or GoogleCode. See :ref:`Change-Hooks` for more information. .. bb:chsrc:: GoogleCodeAtomPoller .. _GoogleCodeAtomPoller: GoogleCodeAtomPoller ~~~~~~~~~~~~~~~~~~~~ The :bb:chsrc:`GoogleCodeAtomPoller` periodically polls a Google Code Project's commit feed for changes. Works on SVN, Git, and Mercurial repositories. Branches are not understood (yet). It accepts the following arguments: ``feedurl`` The commit Atom feed URL of the GoogleCode repository (MANDATORY) ``pollinterval`` Polling frequency for the feed (in seconds). Default is 1 hour (OPTIONAL) As an example, to poll the Ostinato project's commit feed every 3 hours, the configuration would look like this:: from googlecode_atom import GoogleCodeAtomPoller c['change_source'] = GoogleCodeAtomPoller( feedurl="http://code.google.com/feeds/p/ostinato/hgchanges/basic", pollinterval=10800) (note that you will need to download ``googlecode_atom.py`` from the Buildbot source and install it somewhere on your PYTHONPATH first)