Buildbot v0.8.6p1 documentation

Master-Slave API

This section describes the master-slave interface.

Connection

The interface is based on Twisted's Perspective Broker, which operates over TCP connections.

The slave connects to the master, using the parameters supplied to buildslave create-slave. It uses a reconnecting process with an exponential backoff, and will automatically reconnect on disconnection.

Once connected, the slave authenticates with the Twisted Cred (newcred) mechanism, using the username and password supplied to buildslave create-slave. The mind is the slave bot instance (class buildslave.bot.Bot).

On the master side, the realm is implemented by buildbot.master.Dispatcher, which examines the username of incoming avatar requests. There are special cases for change, debug, and statusClient, which are not discussed here. For all other usernames, the botmaster is consulted, and if a slave with that name is configured, its buildbot.buildslave.BuildSlave instance is returned as the perspective.

Build Slaves

At this point, the master-side BuildSlave object has a pointer to the remote, slave-side Bot object in its self.slave, and the slave-side Bot object has a reference to the master-side BuildSlave object in its self.perspective.

Bot methods

The slave-side Bot object has the following remote methods:

remote_getCommands
Returns a list of (name, version) for all commands the slave recognizes
remote_setBuilderList

Given a list of builders and their build directories, ensures that those builders, and only those builders, are running. This can be called after the initial connection is established, with a new list, to add or remove builders.

This method returns a dictionary of SlaveBuilder objects - see below

remote_print
Adds a message to the slave logfile
remote_getSlaveInfo

Returns the contents of the slave's info/ directory. This also contains the keys

environ
copy of the slaves environment
system
OS the slave is running (extracted from pythons os.name)
basedir
base directory where slave is running
remote_getVersion
Returns the slave's version

BuildSlave methods

The master-side object has the following method:

perspective_keepalive
Does nothing - used to keep traffic flowing over the TCP connection

Setup

After the initial connection and trading of a mind (Bot) for an avatar (BuildSlave), the master calls the Bot's setBuilderList method to set up the proper slave builders on the slave side. This method returns a reference to each of the new slave-side SlaveBuilder objects, described below. Each of these is handed to the corresponding master-side SlaveBuilder object.

This immediately calls the remote setMaster method, then the print method.

Pinging

To ping a remote SlaveBuilder, the master calls its print method.

Building

When a build starts, the master calls the slave's startBuild method. Each BuildStep instance will subsequently call the startCommand method, passing a reference to itself as the stepRef parameter. The startCommand method returns immediately, and the end of the command is signalled with a call to a method on the master-side BuildStep object.

Slave Builders

Each build slave has a set of builders which can run on it. These are represented by distinct classes on the master and slave, just like the BuildSlave and Bot objects described above.

On the slave side, builders are represented as instances of the buildslave.bot.SlaveBuilder class. On the master side, they are represented by the buildbot.process.slavebuilder.SlaveBuilder class. The identical names are a source of confusion. The following will refer to these as the slave-side and master-side SlaveBuilder classes. Each object keeps a reference to its opposite in self.remote.

Slave-Side SlaveBuilder Methods

remote_setMaster
Provides a reference to the master-side SlaveBuilder
remote_print
Adds a message to the slave logfile; used to check round-trip connectivity
remote_startBuild
Indicates that a build is about to start, and that any subsequent commands are part of that build
remote_startCommand
Invokes a command on the slave side
remote_interruptCommand
Interrupts the currently-running command
remote_shutdown
Shuts down the slave cleanly

Master-side SlaveBuilder Methods

The master side does not have any remotely-callable methods.

Commands

Actual work done by the slave is represented on the master side by a buildbot.process.buildstep.RemoteCommand instance.

The command instance keeps a reference to the slave-side buildslave.bot.SlaveBuilder, and calls methods like remote_startCommand to start new commands. Once that method is called, the SlaveBuilder instance keeps a reference to the command, and calls the following methods on it:

Master-Side RemoteCommand Methods

remote_update
Update information about the running command. See below for the format.
remote_complete
Signal that the command is complete, either successfully or with a Twisted failure.

Updates

Updates from the slave, sent via remote_update, are a list of individual update elements. Each update element is, in turn, a list of the form [data, 0] where the 0 is present for historical reasons. The data is a dictionary, with keys describing the contents. The updates are handled by remoteUpdate.

Updates with different keys can be combined into a single dictionary or delivered sequentially as list elements, at the slave's option.

To summarize, an updates parameter to remote_update might look like this:

[
    [ { 'header' : 'running command..' }, 0 ],
    [ { 'stdout' : 'abcd', 'stderr' : 'local modifications' }, 0 ],
    [ { 'log' : ( 'cmd.log', 'cmd invoked at 12:33 pm\n' ) }, 0 ],
    [ { 'rc' : 0 }, 0 ],
]

Defined Commands

The following commands are defined on the slaves.

shell

Runs a shell command on the slave. This command takes the following arguments:

command

The command to run. If this is a string, will be passed to the system shell as a string. Otherwise, it must be a list, which will be executed directly.

workdir

Directory in which to run the command, relative to the builder dir.

env

A dictionary of environment variables to augment or replace the existing environment on the slave. In this dictionary, PYTHONPATH is treated specially: it should be a list of path components, rather than a string, and will be prepended to the existing python path.

initial_stdin

A string which will be written to the command's standard input before it is closed.

want_stdout

If false, then no updates will be sent for stdout.

want_stderr

If false, then no updates will be sent for stderr.

usePTY

If true, the command should be run with a PTY (POSIX only). This defaults to the value specified in the slave's buildbot.tac.

not_really

If true, skip execution and return an update with rc=0.

timeout

Maximum time without output before the command is killed.

maxTime

Maximum overall time from the start before the command is killed.

logfiles

A dictionary specifying logfiles other than stdio. Keys are the logfile names, and values give the workdir-relative filename of the logfile. Alternately, a value can be a dictionary; in this case, the dictionary must have a filename key specifying the filename, and can also have the following keys:

follow

Only follow the file from its current end-of-file, rather that starting from the beginning.

logEnviron

If false, the command's environment will not be logged.

The shell command sends the following updates:

stdout
The data is a bytestring which represents a continuation of the stdout stream. Note that the bytestring boundaries are not necessarily aligned with newlines.
stderr
Similar to stdout, but for the error stream.
header
Similar to stdout, but containing data for a stream of buildbot-specific metadata.
rc
The exit status of the command, where -- in keeping with UNIX tradition -- 0 indicates success and any nonzero value is considered a failure. No further updates should be sent after an rc.
log
This update contains data for a logfile other than stdio. The data associated with the update is a tuple of the log name and the data for that log. Note that non-stdio logs do not distinguish output, error, and header streams.

uploadFile

Upload a file from the slave to the master. The arguments are

workdir

The base directory for the filename, relative to the builder's basedir.

slavesrc

Name of the filename to read from., relative to the workdir.

writer

A remote reference to a writer object, described below.

maxsize

Maximum size, in bytes, of the file to write. The operation will fail if the file exceeds this size.

blocksize

The block size with which to transfer the file.

keepstamp

If true, preserve the file modified and accessed times.

The slave calls a few remote methods on the writer object. First, the write method is called with a bytestring containing data, until all of the data has been transmitted. Then, the slave calls the writer's close, followed (if keepstamp is true) by a call to upload(atime, mtime).

This command sends rc and stderr updates, as defined for the shell command.

uploadDirectory

Similar to uploadFile, this command will upload an entire directory to the master, in the form of a tarball. It takes the following arguments:

workdir slavesrc writer maxsize blocksize

See uploadFile

compress

Compression algorithm to use -- one of None, 'bz2', or 'gz'.

The writer object is treated similarly to the uploadFile command, but after the file is closed, the slave calls the master's unpack method with no arguments to extract the tarball.

This command sends rc and stderr updates, as defined for the shell command.

downloadFile

This command will download a file from the master to the slave. It takes the following arguments:

workdir

Base directory for the destination filename, relative to the builder basedir.

slavedest

Filename to write to, relative to the workdir.

reader

A remote reference to a reader object, described below.

maxsize

Maximum size of the file.

blocksize

The block size with which to transfer the file.

mode

Acess mode for the new file.

The reader object's read(maxsize) method will be called with a maximum size, which will return no more than that number of bytes as a bytestring. At EOF, it will return an empty string. Once EOF is received, the slave will call the remote close method.

This command sends rc and stderr updates, as defined for the shell command.

mkdir

This command will create a directory on the slave. It will also create any intervening directories required. It takes the following arugment:

dir

Directory to create.

The mkdir command produces the same updates as shell.

rmdir

This command will remove a directory or file on the slave. It takes the following arguments:

dir

Directory to remove.

timeout maxTime

See shell, above.

The rmdir command produces the same updates as shell.

cpdir

This command will copy a directory from place to place on the slave. It takes the following arguments:

fromdir

Source directory for the copy operation, relative to the builder's basedir.

todir

Destination directory for the copy operation, relative to the builder's basedir.

timeout maxTime

See shell, above.

The cpdir command produces the same updates as shell.

stat

This command returns status information about a file or directory. It takes a single parameter, file, specifying the filename relative to the builder's basedir.

It produces two status updates:

stat

The return value from Python's os.stat.

rc

0 if the file is found, otherwise 1.

Source Commands

The source commands (bk, cvs, darcs, git, repo, bzr, hg, p4, p4sync, and mtn) are deprecated. See the docstrings in the source code for more information.